Specifications 4V410-15
1. Before installing, be sure the valve hasn't been damaged via transportation.
2. It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4. Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5. Take measure to avoid vibration and frozen.
6. Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly.
7. To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
8. After installing, please use the manual override to test valve first.
Features 4V410-15
Pneumatic 4V410-15 AC220, 4V410-15 DC24 - five-line two-position (5/2) pneumatic dispensers with one-way electropneumatic control and spring return of the goldsmith to its original position. These valves are used in various types of pneumatic drives and serve to control the direction of the flow of the working environment of the air system (compressed air), its launch and stop.
Model: 4V410-15(NPT)Valve Type: 5/2 way Solenoid ValveEffective Cross Sectional Area: 50 sq mm CV = 2.79Coil Type: Single CoilPort Size: 1/2 NPT Inlet, Outlet and ExhaustConnection: ThreadedInitial Status: Normal CloseWorking Medium: 40 Micron Filtered AirOperation: Internal PilotedWorking Pressure: 0.15 – 0.8 Mpa / 22 – 116 psiMax. Tested Pressure: 1.2 Mpa / 174 psiAmbient Temperature: 5 – 50 ℃ 41 – 122 ℉Operating Voltage Tolerance: ± 10%Power Consumption: 3W for DC / 3.5VA for ACCoil Protection: IP65Insulation: F ClassWiring/Connector: DIN ConnectorSwitching Frequency: 5 Cycles / SecResponse Time: 0.05 Sec
